Skip to main content

A Horror / Tragic Story

I opened the door, to my horror, a few skeletons lay there, chained on the wall.

Okay, time to recap. I and my friends, Jack and Peter, were playing around an old, abandoned mansion. We were told that no one was allowed to enter. However, curiosity overcame us and we picked the lock, granting us entrance into the sacred lair of the unknown.

At the sight of the skeletons, the three of us were completely stunned. Our jaw hung wide open for a few minutes before we came back to our senses. My sixth sense told me that something was about to go wrong, so I urged the other two to back out of the mansion.

ā€œDon’t be such a chicken,ā€ said Jack, with a shaky voice.

ā€œAren’t you scared too?ā€ I challenged him.

ā€œYes, but we might never get the chance to explore here again if we leave now.ā€

ā€œā€¦All right, but we leave as soon as the first sign of danger shows.ā€

We ventured deeper into the mansion. The design looked like some sort of torture room, or a prison. Even though I was afraid, I was eager to discover more. Throughout the lair, we did not lose sight of skeletons or spider webs. These were at every corner, at every turn. The occasional howls from a distance made the hair on our backs stand up straight. We finally arrived at a long hallway. Jack picked up a piece of wood and lighted it up with his lighter. The flame seared at first, but after it simmered down, I was able to see the walls clearly. There were ancient writings, the kind we usually see in an Egyptian grave robber movie. As the expert in history, Jack tried his best to decipher the carvings. Meanwhile, Peter leaned towards the wall to catch his breath. At that very moment, a cold chill went down my spine.

ā€œWatch out!ā€ I shouted.

Before he could react, that portion of the wall he was leaning against flipped, trapping him on the other side. All he could let out was a loud shriek and he vanished behind the walls. I pounded against the wall, shouting his name. Only then did I know what real terror felt like. However, the chance of rescuing him was bleak. I sank to the ground, desolated and hopeless.

ā€œLet’s get out of here, we have to inform the adults!ā€ suggested Jack.

I got to my feet swiftly and both of us sped through the building. My heart was racing. I knew that danger may be waiting at the next corner. I could hear blood pounding in my ears. Wait, was that a creak I heard? ā€œUh-oh,ā€ I thought to myself. The ceiling began to crumble. My sub-consciousness took over. I sprang forward and tackled Jack. Both of us fell to the ground. Just as I thought that trouble was out of the way, the burning piece of wood slipped out of his hand and landed in a pile of grease. Fire started spreading like mad. I struggled to get up.

ā€œCome on, there’s not much time left!ā€ I screamed as I turned towards the exit.

ā€œAahhhhhhhhhhhhhhhhh!ā€

In a split second, my head turned 180 degrees. A gigantic marble pillar fell on Jack. I mustered all the strength from every single cell in my body, trying to lift it up, to no avail. My eyes were watery. I was completely out of ideas.

ā€œSave yourself, leave me, please,ā€ muttered Jack, with a weak tone.

This was certainly a tough decision for me. All the moments we had spent together flashed through my mind. How could I leave him now? As the fire was close to sealing my only exit, I knew that I had to be rational. I dived for my escape route.

Tears rolled down my cheeks as the mansion erupted into flames behind me.

Popular posts from this blog

Rectangular Microstrip Patch Antenna

Microstrip is a type of electrical transmission line which can be fabricated using printed circuit board technology, and is used to convey microwave-frequency signals. It consists of a conducting strip separated from a ground plane by a dielectric layer known as the substrate. The most commonly employed microstrip antenna is a rectangular patch which looks like a truncated  microstrip  transmission line. It is approximately of one-half wavelength long. When air is used as the dielectric substrate, the length of the rectangular microstrip antenna is approximately one-half of a free-space  wavelength . As the antenna is loaded with a dielectric as its substrate, the length of the antenna decreases as the relative  dielectric constant  of the substrate increases. The resonant length of the antenna is slightly shorter because of the extended electric "fringing fields" which increase the electrical length of the antenna slightly. An early model of the microst...

Prepare Data for Exploration : weekly challenge 1

Prepare Data for Exploration : weekly challenge 1 #coursera #exploration #weekly #challenge 1 #cybersecurity #coursera #quiz #solution #network Are you prepared to increase your data exploration abilities? The goal of Coursera's Week 1 challenge, "Prepare Data for Exploration," is to provide you the skills and resources you need to turn unprocessed data into insightful information. With the knowledge you'll gain from this course, you can ensure that your data is organised, clean, and ready for analysis. Data preparation is one of the most important processes in any data analysis effort. Inaccurate results and flawed conclusions might emerge from poorly prepared data. You may prepare your data for exploration with Coursera's Weekly Challenge 1. You'll discover industry best practises and insider advice. #answers #questions #flashcard 1 . Question 1 What is the most likely reason that a data analyst would use historical data instead of gathering new data? 1 / 1...

Cracking Passwords Using John the Ripper: A Complete Step-by-Step Guide

Cracking Passwords Using John the Ripper: A Complete Step-by-Step Guide In today's post, we’re diving into a practical lab exercise that shows how to use John the Ripper, one of the most effective password-cracking tools in cybersecurity. Whether you're an IT professional or a cybersecurity student, mastering John the Ripper will help you understand password vulnerabilities and enhance your penetration testing skills. Lab Objective: The goal of this lab is to crack the root password on a Linux system (Support) and extract the password from a password-protected ZIP file (located on IT-Laptop). Both tasks are performed using John the Ripper. Steps to Crack the Root Password on Support: Open the Terminal on the Support system. Change directories to /usr/share/john . List the files and open password.lst to view common password guesses. Use John the Ripper to crack the root password by running john /etc/shadow . Once cracked, the password is stored in the john.pot file for future u...