Skip to main content

Road safety

Everyday many people are involved in road accidents. Some are killed. Many more are injured or maimed. So it is important for us to learn to use the roads properly and safely. No sane person would like to be involved in an accident.As the roads are very busy nowadays, we should be very careful when crossing one. It is safer to use a pedestrian crossing or an overhead bridge whenever one is available. Never cross a road by dashing across it. That is inviting trouble. If there are no crossings, then we must look carefully right and left and cross only when it is safe to do so.
Some of us take the bus to school. It is important that we do not try to get on or off a bus while it is still moving. I tried to get on a moving bus once. It dragged me a short distance and nearly ran over me. I was lucky to escape with only some scratches on my legs. Also we must not fool around while in the bus. A suddenly lurch can send us knocking our heads against something hard.
Using a bicycle can be dangerous too. We must pay attention on the road and never cycle too far out to the middle of the road. We must obey all traffic rules. Also we must make sure our bicycles are in good condition with working brakes, lights etc.
These are some things we can do to avoid accidents. However there is no guarantee that we will never be involved in one. The important thing is to stay alert at all times while using the roads. We must know what is happening around us. In that way we can take necessary action to avoid danger whenever we see one. Road safety is very much up to how we use the roads. Use them carefully and we may be able to use them for a long time. Use them carelessly and we may never be able to use them again.
   
maim to injure a person so severely that a part of their body will no longer work as it should
   
dash move quickly
   
lurchto move in an irregular way, especially making sudden movements backwards or forwards or from side to side

Comments

Popular posts from this blog

Rectangular Microstrip Patch Antenna

Microstrip is a type of electrical transmission line which can be fabricated using printed circuit board technology, and is used to convey microwave-frequency signals. It consists of a conducting strip separated from a ground plane by a dielectric layer known as the substrate. The most commonly employed microstrip antenna is a rectangular patch which looks like a truncated  microstrip  transmission line. It is approximately of one-half wavelength long. When air is used as the dielectric substrate, the length of the rectangular microstrip antenna is approximately one-half of a free-space  wavelength . As the antenna is loaded with a dielectric as its substrate, the length of the antenna decreases as the relative  dielectric constant  of the substrate increases. The resonant length of the antenna is slightly shorter because of the extended electric "fringing fields" which increase the electrical length of the antenna slightly. An early model of the microst...

How to Set Up Guest Access on Ruckus ZoneDirector – Step-by-Step Guide

 Are you looking to configure guest access on your Ruckus wireless network? In this blog, we’ll take you through the entire process of setting up secure guest access using Ruckus ZoneDirector. Whether you're an IT admin or a network manager, this guide will help you create a BYOD guest WLAN, set up guest pass authentication, and secure your network with wireless client isolation. Step-by-Step Tutorial Includes: Logging into the Ruckus ZoneDirector controller Configuring Guest Access services for BYOD devices Creating a dedicated guest WLAN Using guest pass authentication for added security Isolating guest devices on the network for better privacy Accessing the guest network from a client device By following this tutorial, you'll be able to provide a seamless and secure experience for visitors connecting to your WiFi network. Check out our video tutorial for a detailed walkthrough! #RuckusZoneDirector #GuestAccess #WiFiSetup #BYOD #WLANConfiguration #WirelessNetwork #NetworkSecu...

Cracking Passwords Using John the Ripper: A Complete Step-by-Step Guide

Cracking Passwords Using John the Ripper: A Complete Step-by-Step Guide In today's post, we’re diving into a practical lab exercise that shows how to use John the Ripper, one of the most effective password-cracking tools in cybersecurity. Whether you're an IT professional or a cybersecurity student, mastering John the Ripper will help you understand password vulnerabilities and enhance your penetration testing skills. Lab Objective: The goal of this lab is to crack the root password on a Linux system (Support) and extract the password from a password-protected ZIP file (located on IT-Laptop). Both tasks are performed using John the Ripper. Steps to Crack the Root Password on Support: Open the Terminal on the Support system. Change directories to /usr/share/john . List the files and open password.lst to view common password guesses. Use John the Ripper to crack the root password by running john /etc/shadow . Once cracked, the password is stored in the john.pot file for future u...